mike@devildogtools.com

Dent Fix 15DX Spot Annihilator Deluxe Boron Spot Weld Drill Kit This kit version of the DF-15 gives you the option of storing the Annihilator and your bits in a form fitted hard plastic carrying case. "Smart" pressure valve helps prevent breakage of bits. 1000 RPM for harder UHSS Boron Steels! Cuts thru Ultra High Strength Steels Now with larger 3" C-clamp Use with Dent Fix Boron cutting bits (available here) Comes complete with: SPOT ANNIHILATOR (1) in-line oiler (1) 8.0 mm HSCO drill bit (2) 8.0 mm Titanium Coated HSCO bits (1) 10.0 mm Titanium coated HSCO bit Hard plastic carrying case This is the "Original Spitznagel" Spot Weld Drill that applies the cutting pressure pneumatically. You do not have to push on the drill bit. Our patented valved cylinder applies gentle pressure toward the panel. When the drill bit starts to turn even more pressure is applied. This "Smart" pressure valve helps prevent breakage of bits and applies correct consistent pressure from the first to the last spot weld, ensuring the long life of your bits by preventing breakage. The 1000-rpm motor makes sure you do not burn up bits prematurely. The ultimate spot weld drill lets you set the depth. Using the large blue adjustment ring you may set your drilling depth. Drill through only the top panel and leave the underlying panel clean and ready for the replacement. No plugs to grind off and no pilot drill holes to fill. The DF-15DX is our 1000-rpm depth adjustable drill with large 3 inch tall C-clamp. It will arrive with one 8.0 mm HSCO drill bit, two 8.0 mm Titanium Coated HSCO bits, one 10.0 mm Titanium coated HSCO bit, one-year warranty and our guarantee that this will be one of your most used and beloved tools. This tool can drill through UHSS or Boron Steel when used with the DF-1690 Tungsten Carbide Bits. We have lowered the RPM on all our Spot Weld Drills so that our new bits for Boron cut more efficiently. Features and Specs: The Spot Annihilator, Spot Weld Cutter is a unique cutting tool. It's patented pneumatic air valve controls drill speed and cutting pressure. It is the only drill in the world with this system. Depth Adjustable: Set the blue depth adjustment ring to the desired depth and you are ready to drill. No more cutting into the second panel or holes to fill. The DF-15 applies its own cutting pressure using line pressure. A patented air valve automatically sets the optimum cutting pressure. This unique air valve gives the drill consistency during cutting and increases the life expectancy of drill bits. Customers report an average of six months to a year of use from the bits included in the deluxe kit. Note: Use DentFix or Spitznagel drill bits only. The tool is sensitive to the length of the bit. Non-OEM bits void warranties. This depth adjustable spot weld drill applies the cutting pressure for you. It is important to release the trigger when the drill bit has stopped cutting. Allow the drill to make gentle contact with the panel. This will provide maximum drill bit life.